Die-casting Aluminium 150W led street lighting

Key Features 1. Wide power range: 25W~200W 2. Special circuit design, single LED’s damage won't affect others' normal work 3. Tool-less open for easy installation, replacement and maintenance. 4. Power-off protection make the Power automatically be off when fixture be opened. 5. Smooth body would greatly diminish dust accumulation and bird droppings heap up. 6. level bubble makes it easy for the installer to adjust the position of the lamp 7. Breather ensures air balance inside and outside of the lamp 8. High Lumen output up to 150lm/w with high quality LED chips 9. Pass the 1000 hour salt spray test 10. Vertical and horizontal installation both available, adjustable by ±15°in both directions. 11. Multiple lighting control options are available, e.g. DALI, 1-10V, photocell 12. Designed to last at least 100,000 hours at L70 13. Multiple lighting distributions available 14. ENEC/ CB/ CE/ RoHS/ IK08 /IP66 /LM79 15. 7 years limited warranty available.
Chat Now

Product Details

Die-casting Aluminium 150W led street lighting


led street lighting


Lamp aging method

The aging of the luminaire is carried out in an environment without forced ventilation and temperature control in the range of 20 ° C to 30 ° C. The luminaire is erected in the normal installation posture, and the power is turned on according to the nominal voltage of the lamp or the maximum voltage of the nominal applicable voltage range. Power work. During the aging process, the luminaire should be turned off no less than 2 times every 24 hours. The closing time should be 25-35 minutes, and the interval should be at least 30 minutes. The number of samples is not less than three. During the test, the lamp shall not be damaged or burnt, otherwise it will not be qualified.


led street lighting 1


led street lighting 2 (2)


led street lighting 3

Hot Tags: Die-casting Aluminium 150W led street lighting, manufacturers, suppliers, buy, cheap, price

Inquiry

You Might Also Like