ZGSM series-H5 LED Streetlighting with the power from 50W to 240W;
a. System lumen efficacy up to 125 lm/w
b. Philips Lumileds Luxeon 3030 2D chips
c. Meanwell HLG series Driver/Inventronics driver
d. 100,000 hours under L70 standard, LM80 & TM21
e. 10kv/6kv Surge Protection Device
f. Guaranteed 7 years
g. CE, ROHS,ENEC,CB,FCC listed
h. IP66 IK10
i. Vertical and Horizontal mounting both ok
Roadway, street, path way, park, public square, parking lot
The H5 series street light is made of aluminum alloy Die-casting and stretch housing which have better heat transfer. All of the screws on H5 series street fixture are stainless steel to resistant to corrosion.
Professional lens design, better performance for street lighting, The high transparency and uvioresistant PC lens be used in H5 series street light to improve high system efficiency and effective protect the LEDs without any broken.
The H5 series street light have excellent heat dissipation with very low Ts point temperature, because it’s heat sink direct exposed to the air.
Through use the High efficiency Philips Luxeon 3030 2D chips, the system efficiency of H5 series street light can up to 130lm/w.
H5 series street light support both vertical installation and horizontal installation. The installation adjustable tilt angle can be 0-5-10-15°
Different road situation need different light distribution to make sure good lighting effect, Because of this reason, H5 series street light have three lens type can supply three light distribution to suit to different road width, pole distance, pole height and so on.
At present, most street light is considering to join to smart lighting system, such as PLC, Zigbee, Wifi and other street lamp intelligent control system. Therefore, the H5 series can use Inventronics or Meanwell 0-10v dimming driver if request to support the system.
Number of Modules
84pcs Parking lot project in England- 8m pole with 3pcs 100W H5 series street light