Energy Saving IP66 Led outdoor luminaire 35W
ZGSM series-K series outdoor LED street lights with the power from 25W to 200W; Advantages a. Fully aluminum alloy Die-casting case , stainless steel screws. b. High transparency tempered glass c. Smooth body with self-cleanness d. High lamp luminous efficiency: up to 125 LM/W. e. Toolless
The K series street light use fully aluminum alloy Die-casting case which have better heat transfer. All of the screws on K series street fixture are all stainless steel to resistant to corrosion.
The high transparency tempered glass be used in K series street light to improve high system efficiency and effective protect the LEDs without any broken.
The smooth body design on the back of K series street light can make the light no accumulation of dust and bird droppings with rain wash.
Through use the High efficiency Philips Luxeon 3030 2D LED chips, the system efficiency of KM series street light can up to 125lm/w.
With the snap lock, the street fixture can be opened without any tools. This design will be very convenient for maintain.
When people open the K series street fixture, the power will be cut immediately since there have a power turn off protector mount on the end of driver input. This function can keep safety of personnel effectively.
Roadway, street, path way, park, public square, parking lot, carpark, high way, Urban main roads
Here are our project for your reference.
Project time: Aug.2018
120W LED Street Light，Model：ZGSM-LD120KM，Lumileds 3030 and Inventronics Driver, 2M, 4000K,13pcs
60W LED Street Light，Model：ZGSM-LD60KM，Lumileds 3030 and Inventronics Driver, 1M, 4000K,11pcs
|LED Brand||Philips LUMILEDS® LUXEON 3030|
|Driver Brand||Meanwell HLG series/ Inventronics|
|LED Chip Quantity||72pcs|
|Lamp Rated Luminous Efficiency||>125 lm /w|
|Lamp Rated Lumen output||4375 lm (Lumen tolerance +/- 5%)|
ZGSM provides a total solution for intelligence street lighting system.
ZGSM street light intelligence system is made up by software, concentrator, terminal controller. The concentrator controller is installed in the distribution cabinet, the terminal controller is installed in the lighting terminal.
If you need a solution to uppdate to this control system in future, we will installed a 5pin or 7pin NEMA socket on our K series first. When you want to update, you just need to install the terminal controller on this socket which is easy to operate.