90W LED Street Light With Dali and 7pin NEMA Socket
The K series street light use fully aluminum alloy Die-casting case which have better heat transfer. All of the screws on K series street fixture are all stainless steel to resistant to corrosion.
The high transparency tempered glass be used in K series street light to improve high system efficiency and effective protect the LEDs without any broken.
The smooth body design on the back of K series street light can make the light no accumulation of dust and bird droppings with rain wash.
Through use the High efficiency Philips Luxeon 3030 2D LED chips, the system efficiency of KM series street light can up to 125lm/w.
With the snap lock, the street fixture can be opened without any tools. This design will be very convenient for maintain.
1. Wide power range: 25W~200W.
2. Special circuit design, single LED’s damage won't affect others' normal work.
3. Tool-less open for easy installation, replacement and maintenance.
4. Power-off protection makes the power automatically off when fixture is opened.
5. Smooth body would greatly diminish dust accumulation and bird droppings heap up.
6. Level bubble makes it easy for the installer to adjust the position of the lamp.
7. High Lumen output up to 150lm/ w with high quality LED chips.
8. Pass the 1000 hour salt spray test.
9. Vertical and horizontal installation both available, adjustable by ±15° in both directions.
10.Multiple lighting control options are available, e.g. DALI, 1-10V, photocell, motion sensor.
11.Designed to last at least 100, 000 hours at L70.
12.Multiple lighting distributions are available.
13.ENEC/ CB/ CE/ RoHS/ IK08 /IP66 /LM79
14. 7 years limited warranty available.
Residential areas, Shopping areas, Public squares and parks, Parking areas, Cycle and foot paths
Here are our project with K series for your reference.
|LED Brand||Philips LUMILEDS® LUXEON 3030|
|Driver Brand||Meanwell HLG series/ Inventronics|
|LED Chip Quantity||144pcs|
|Lamp Rated Luminous Efficiency||>130 lm /w|
|Lamp Rated Lumen output||11,700 lm (Lumen tolerance +/- 5%)|
|Color Rendering Index||Ra>70|
|Color Temperature||4000, 5000 or 5700K|
|Photometric Type||Type I Medium;Type II Medium;Type III Medium|
|Optimal Operating Temperature||25℃|
|Working Environment||Between-40°C~+50°C, 10%~90%RH|
|Total Harmonic Distortion||< 10%|
|Lumen Maintenance||> 100,000 hours -L70, @25 ºC (77 ºF)|
|Body and Shell Materials||Die-cast aluminum;Tempered Glass|
|IP Rating||IP66 with test report|
|IK Rating||IK08 with test report|
|Certification||CE, ROHS, IOS9001, ISO14001, LM-80|
|Optional Function||1-10V DC or PWM Signal or Resistance Dimming|