60W Die-Casting Aluminum LED Highway Light
The K series street light use fully aluminum alloy Die-casting case which have better heat transfer. All of the screws on K series street fixture are all stainless steel to resistant to corrosion.
The high transparency tempered glass be used in K series street light to improve high system efficiency and effective protect the LEDs without any broken.
The smooth body design on the back of K series street light can make the light no accumulation of dust and bird droppings with rain wash.
Through use the High efficiency Philips Luxeon 3030 2D LED chips, the system efficiency of KM series street light can up to 125lm/w.
With the snap lock, the street fixture can be opened without any tools. This design will be very convenient for maintain.
When people open the K series street fixture, the power will be cut immediately since there have a power turn off protector mount on the end of driver input. This function can keep safety of personnel effectively.
In order to protect the K series street fixture without any broken from surge, we add a surge protection device(SPD) on the end of driver input, it can resistant 10KV surges which possible come from power grid or thunder.
There have a imported breather both on driver box and led board box, with this breather, the inside and outside of street light can keep same air pressure, so there will be prevented the water leave inside the fixture.
K series street light support both vertical installation and horizontal installation. The installation adjustable tilt angle can be 0-5-10-15°
K series street light have three lens type can supply three light distribution to suit to different road width, pole distance, pole height and so on.
Normally, if non-dimmable version, we will use Meanwell high-end HLG series driver in KM series street light, if dimmable version, we will use Inventronics high-end programmable driver which integrate 0-10V,PWM and timer dimming and 6KV/10KV surge protection inside. It can provide excellent performance and lifetime.
|LED Brand||Philips LUMILEDS® LUXEON 3030|
|Driver Brand||Meanwell HLG series/ Inventronics|
|LED Chip Quantity||96pcs|
|Lamp Rated Luminous Efficiency||>130 lm /w|
|Lamp Rated Lumen output||7,800 lm (Lumen tolerance +/- 5%)|
|Color Rendering Index||Ra>70|
|Color Temperature||4000, 5000 or 5700K|
|Photometric Type||Type I Medium;Type II Medium;Type III Medium|
|Optimal Operating Temperature||25℃|
|Working Environment||Between-40°C~+50°C, 10%~90%RH|
|Total Harmonic Distortion||< 10%|
|Lumen Maintenance||> 100,000 hours -L70, @25 ºC (77 ºF)|
|Body and Shell Materials||Die-cast aluminum;Tempered Glass|
|IP Rating||IP66 with test report|
|IK Rating||IK08 with test report|
|Certification||CE, ROHS, IOS9001, ISO14001, LM-80|
|Optional Function||1-10V DC or PWM Signal or Resistance Dimming|